Preform Resources' Online Store



How To Purchase Our Products



Two Problems:

Shipping costs vary as fuel prices fluctuate. They also vary widely with customer location.

Two Solutions:   (choose one!)

(1) Preform Resources would be delighted to give you a personalized shipping quote based on your order and delivery requirements. Just phone or e-mail us with your particulars. We'll make the necessary inquiries and let you know.

(2) Alternatively, if you have a FedEx Ground or UPS account of your own, we'll be happy to bill your account when we ship your parts. Call or e-mail to place your order. Please note that our multi-panel body kits are usually too large to ship in a single box via either FedEx Ground or UPS. In those cases, shipping via common carrier is the best solution.

If you have any questions at all, please don't hesitate to phone or e-mail us.

Product Categories:
1) MGB6) VW Rabbit
2) MGC7) Ford Mustang
3) Spridget8) Miscellaneous
4) Bugeye9) Slideshow of our Inventory
5) Mini

Note: additional photos of these parts can be found in our Project Gallery.


1)  Parts for MGB Sports and Racing Cars



Fiberglass MGB Sebring Body Kit

Now available!   This body kit authentically replicates the appearance of the works MGC GT racecars that competed in the Sebring 12-hour endurance races of 1968 and 1969. We believe this to be the best quality and most complete Sebring-style body kit ever available. Brand new molds, better materials, and more meticulous fabrication... You'll be delighted with the fit and finish of these panels!

Here's an exciting wrinkle: we're offering our Sebring Kit with your choice of three different styles of "Sebring" front valance. The first option is an air dam with a wide radiator opening; which we anticipate will be popular for high power hot-rods. The second option has a narrower radiator opening and optimally placed brake cooling ducts; we anticipate it will be popular with MGB GT V8 vintage racers. The third option is a classically rolled-under front valance, as used on the works racecars. We'll upload more photos soon. In the meantime, please phone for details.

Our Sebring Kit includes: four Sebring style flared fiberglass fenders, your choice of three different styles of fiberglass front valance, a Sebring style fiberglass rear valance, plus rear wheel arch filler panels, West System epoxy, fasteners, and written installation instructions. The body panels are fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Smooth, sandable gray gelcoat. (Note: kit parts may be special ordered individually. Please inquire.)

Fiberglass MGB Sebring Body Kit
New!   part# MGB-107-RDSTR:   $1900
New!   part# MGB-107-GT:   $1900
(photo 1)   (photo 2)   (photo 3)   (photo 4)



Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MGB Speedster Body Kit

Developed by and exclusively available from Preform Resources, this body kit was designed for and is popular with Sports Car Club of America racers. It would make a very bold statement on your street or show car! (See our Project Gallery for additional photos.) The Speedster body kit includes four widely flared fiberglass fenders, a special wide fiberglass front air dam, a fiberglass rear valance, plus rear wheel arch filler panels, West System epoxy, fasteners, and written installation instructions. The body panels are fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Smooth, sandable gray gelcoat. (Note: kit parts may be special ordered individually. Please inquire.)

Fiberglass MGB Speedster Body Kit
part# MGB-100-RDSTR:   $1900
part# MGB-100-GT:   $1900
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MGB Hood

This is a high quality replacement for the stock MGB aluminum or steel hoods. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Threaded metal inserts at stock mounting points for latch mechanism and hinges. Regular hinge, prop, and hold-down. Complete and ready to bolt on. Smooth, sandable gray gelcoat.

Fiberglass MGB Hood
part# MGB-101a:   $395

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass MGB Hood - Skin Only
(no hinge or latch mounting features)
part# MGB-101b:   $185

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MG RV8 Hood

As developed by Rover for the MG RV8 model, introduced in 1992-3, this hood fits MGB too! It's popular with the V8 conversion crowd, since it provides over an inch more carburetor clearance. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Threaded metal inserts at stock mounting points for latch mechanism and hinges. Regular hinge, prop, and hold-down. Complete and ready to bolt on. Smooth, sandable gray gelcoat.

Fiberglass MG RV8 Hood
part# MGB-102a:   $395
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass RV8 Hood - Skin Only
(no hinge or latch mounting features)
part# MGB-102b:   $185

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MGB "Special Tuning" Style Air Dam

As developed for racing by MG's "Special Tuning" department, but improved for better fit. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Complete and ready to bolt on. Smooth, sandable gray gelcoat.

Fiberglass MGB "Special Tuning" Style Air Dam
part# MGB-103:   $137
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MGB Sebring Style Rear Valance

Specially developed for customers who "go bumperless," it turns out these valances looks great with chrome bumpers too!

Exciting News!   We now offer two versions. The original chrome-bumper MGB version suits cars produced from 1962 through early 1974. The new rubber-bumper MGB version suits cars produced from mid-year 1974 through the end of production in 1980; it fills the unsightly gap underneath the taillamps that's exposed by removal of the original rubber bumpers.

Either valance may be simply bolted on. However, when installing the new rubber-bumper version we recommend using epoxy to bond the forward edges of the valance to the quarterpanels. Then, the overlap can be feathered out quite nicely to a seamless appearance. For your convenience, we offer an excellent installation kit. The kit includes West System brand epoxy, fasteners, drill bits, and helpful written installation advice.

Converting your MGB from rubber to chrome bumpers? Our valances may be installed with MGB chrome bumpers over top of them. Simply cut slots the for bumper brackets.

Both valances are fabricated from E-glass mat with isophthalic polyester resin, rated 220F. They're provided in smooth, sandable gray gelcoat.

Fiberglass MGB Sebring Style Rear Valance
(for model years 1962 through 1974.5)
part# MGB-104a:   $160
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass MGB Sebring Style Rear Valance
(for model years 1974.5 through 1980)
New!   part# MGB-104b:   $195
(photo 1)   (photo 2)   (photo 3)   (photo 4)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Installation Kit for Sebring Valance
(recommended for use with part# MGB-104b)
New!   part# MGB-104c:   $22

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MGB Trunk Lid Skin

This is a super lightweight racing part. No provisions for hinges or a latch are included. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Smooth, sandable gray gelcoat.

Fiberglass MGB Trunk Lid Skin
part# MGB-105:   $120

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MGB-GT Rear Hatch Spoiler Kit

Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Complete and ready to bolt on. Smooth, sandable gray gelcoat.

Fiberglass MGB-GT Rear Hatch Spoiler Kit
part# MGB-106:   $180

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail





2)  Parts for MGC Sports and Racing Cars



Fiberglass MGC Hood

This is a high quality replacement for the stock MGC aluminum hood. (It may also be used on an MGB for increased clearance over the engine.) Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Threaded metal inserts at stock mounting points for latch mechanism and hinges. Regular hinge, prop, and hold-down. Complete and ready to bolt on. Smooth, sandable gray gelcoat.

Fiberglass MGC Hood
part# MGC-100:   $395
(photo 1)   (photo 2)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail





3)  Parts for MG Midget and later model Sprite Sports and Racing Cars



Fiberglass MG Midget Competition Body Kit

Four flared fenders to provide the tire clearance needed for SCCA racing. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Bolt on the front fenders. Rear fenders (a.k.a. quarterpanels) may be glued on or mounted with your choice of fastener types. Smooth, sandable gray gelcoat.

Fiberglass MG Midget Competition Body Kit
part# Spridget-100:   $700

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MG Midget (and Mk2-4 Austin Healey Sprite) Hood

This is a high quality replacement for the stock MG Midget steel hood. (Also fits later Austin Healey Sprites which have seperate hood and fenders.) Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Threaded metal inserts at stock mounting points for latch mechanism and hinges. Regular hinge, prop, and hold-down. Complete and ready to bolt on. Smooth, sandable gray gelcoat.

Fiberglass MG Midget Hood
part# Spridget-101a:   $295
(photo 1)   (photo 2)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass MG Midget Hood - Skin Only
(no hinge or latch mounting features)
part# Spridget-101b:   $170

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MG Midget (and Mk2-4 Austin Healey Sprite) Air Dams

These are wide racing air dams for MG Midgets with wide SCCA-style front fenders (as sold seperately). Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Smooth, sandable gray gelcoat.

Fiberglass MG Midget Air Dam
(this is the basic version, without bumper molded-in)
part# Spridget-102a:   $120

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass "1972" MG Midget Air Dam
(w/ integral bumper similar in shape to MG's "chrome bumper")
part# Spridget-102b:   $190
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass MG Midget 1500 Bumper and Air Dam

Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Smooth, sandable gray gelcoat.

Fiberglass MG Midget 1500 Bumper and Air Dam
(Two seperate pieces to be used together.) part# Spridget-102c:   $285

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass MG Midget 1500 Replacement Air Dam
(One of these is included in 102c. This is a spare.)
part# Spridget-102d:   $90

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail





4)  Parts for Austin Healey Bugeye Sprite Sports and Racing Cars



Fiberglass Bugeye Sprite Front Clip

This is a high quality replacement for the stock Bugeye Sprite front fenders/hood assembly. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Threaded metal inserts at stock mounting points for latch mechanism and hinges. Regular hinge, prop, and hold-down. Complete and ready to bolt on. Smooth, sandable gray gelcoat.

Fiberglass Bugeye Sprite Front End - stock width
(no fender flares)
part# Bugeye-101a:   $630

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass Bugeye Sprite Front End - medium width
(this version has small flares, for a generally "vintage" look)
part# Bugeye-101b:   $645

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass Bugeye Sprite Front End - extra wide
(this is the version with big flares for SCCA racing)
part# Bugeye-101c:   $795
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail



Fiberglass Bugeye Sprite Rear End

These are high quality replacements for the original Bugeye Sprite rear end. Also available with flared fenders to match our SCCA front clip (above). Two versions: one that installs as a one-piece rear clip and the other that installs as a pair of separate quarter panels. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Smooth, sandable gray gelcoat.

Fiberglass Bugeye Sprite Rear End
(one-piece version with unflared fenders)
part# Bugeye-102a:   $650

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass Bugeye Sprite Rear End
(one-piece version with flared fenders)
part# Bugeye-102b:   $650
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass Bugeye Sprite Rear Quarterpanels
(two-piece version)
part# Bugeye-102c:   $430/pair

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail





5)  Parts for Classic Austin and Morris Mini Sports and Racing Cars



Fiberglass Classic Mini Body Kit

Four flared fenders to provide the tire clearance needed for SCCA racing. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Bolt on the front fenders. Rear fenders (a.k.a. quarterpanels) may be glued on or mounted with your choice of fastener types. Smooth, sandable gray gelcoat.

Fiberglass Classic Mini Body Kit
part# Mini-100:   $650
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail





6) Parts for VW Rabbit Racing Cars



Fiberglass VW Rabbit Body Kit

For flared fenders to provide the tire clearance needed for SCCA racing, plus hood, front bumper, air dam, and rear hatch. The whole kit is lightweight and SCCA Legal. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Bolt on the front fenders. Rear fenders (a.k.a. quarterpanels) may be glued on or mounted with your choice of fastener types. Smooth, sandable gray gelcoat. Parts may be purchased individually too (see below.) Please call if additional information is needed.

Fiberglass VW Rabbit Body Kit - 8 piece
part# Rabbit-100:   $1410

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass VW Rabbit Hood (only)
(No hinge or latch features. Use with hood pins.)
part# Rabbit-101:   $250

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass VW Rabbit Bumper (only)
part# Rabbit-102a:   $185
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass VW Rabbit Air Dam (only)
part# Rabbit-102b:   $185
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail

Fiberglass VW Rabbit Rear Hatch (only)
part# Rabbit-103:   $150

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail





7)  Parts for Ford Mustang Racing Cars



Fiberglass Ford Mustang Body Kit (1979-93)

Four flared fenders to provide the tire clearance needed for SCCA racing. Fabricated from E-glass mat with isophthalic polyester resin, rated 220F. Bolt on the front fenders. Rear fenders (a.k.a. quarterpanels) may be glued on or mounted with your choice of fastener types. Smooth, sandable gray gelcoat.

Fiberglass Ford Mustang Body Kit (1979-93)
part# Mustang-100:   $850
(photo)

Please call (313) 533-2457 or e-mail
us so we can advise shipping cost.
Send E-mail





8)  Miscellaneous and Multi-Use Parts



Coming Soon: various handy bits and pieces for your sports or racecar project!





9)  Some Photos of Our Inventory



Example Parts from Preform Resources' Inventory



*  Orders may alternatively be placed by telephone, mail, e-mail, or in person.
Please contact us about international orders, different shipping arrangements, etc.


Home Page

Online Store

Project Gallery